Flat Welding(SMOOTH)

Down-hand Welding

(Flat Welding)

The dip of welding’s seam is 0°~5°and the corner of welding’s seam is 85°~95°. This point of weld called the point of Flat Welding. And, welding at the point of Flat Welding is called Flat Welding.

Down-hand Welding

(Flat Welding)

The dip of welding’s seam is 0°~5°and the corner of welding’s seam is 85°~95°. This point of weld called the point of Flat Welding. And, welding at the point of Flat Welding is called Flat Welding.

Down-hand Welding

(Flat Welding)

The dip of welding’s seam is 0°~5°and the corner of welding’s seam is 85°~95°. This point of weld called the point of Flat Welding. And, welding at the point of Flat Welding is called Flat Welding.

Down-hand Welding

(Flat Welding)

The dip of welding’s seam is 0°~5°and the corner of welding’s seam is 85°~95°. This point of weld called the point of Flat Welding. And, welding at the point of Flat Welding is called Flat Welding.

Air Welding (GAS-FLUX)

Oxygen-Fuel Gas Welding

(Gas-Flux)

The heat source is to combine combustible gas and combustion-supporting gas by burning. The way of welding is to fuse weldment and the materials of welding which can make atom combine.

Oxygen-Fuel Gas Welding

(Gas-Flux)

The heat source is to combine combustible gas and combustion-supporting gas by burning. The way of welding is to fuse weldment and the materials of welding which can make atom combine.

Scales (TIG)

Scales Welding

(TIG)

Don’t need the lugs. Tubes and tubes are in direct welding and the welding would form to scales shape. It is called Scales Welding(TIG).

Scales Welding

(TIG)

Don’t need the lugs. Tubes and tubes are in direct welding and the welding would form to scales shape. It is called Scales Welding(TIG).

scroll up